Solar Blaster
Solar Blaster
Solar Blaster
Solar Blaster
Solar Blaster

Site Navigation

SOLAR BLASTER STORE

SECONDS (Dinged & Dented)

Occasionally we have products that have been scratched or slightly dented. They are all tested to be in working condition. These seconds will appear in the pull-down menu options on any of our product pages and Store page. They will be marked "Seconds" and will have a
discounted price. No returns will be accepted on any seconds, but they are still fully covered by our warranty.

FIRE SALE ON BROWN 5W MEGA SOLAR ROOFBLASTERS

Stacks Image 9

Our warehouse has too many browns, so buy them while they are hot!

$140.70 each (Regularly $209.99)

Solar RoofBlaster 2.0

Fan size: 80mm 35.2cfm fan
Panel size: 3W solar panel
Colors: Black, Brown, Galvanized, Gray, White

MSRP: $184.99
ON SALE NOW for $149.99 or Bundled for even more savings (black, brown or galvanized only)!

Solar Mega RoofBlaster 2.0

Fan size: 120mm 96cfm fan
Panel size: 5W solar panel
Colors: Black, Brown, Galvanized, Gray, White

MSRP: $249.99

ON SALE NOW

Solar Mega RoofBlaster 2.0 (Adjustable solar panel)

Fan size: 120mm 96cfm fan
Panel size: 5W solar panel ADJUSTABLE
Colors: Black, Brown, Galvanized, Gray, White

MSRP: $304.99

ON SALE NOW

Solar RoofBlaster for Conex Containers

Fan size: 80mm 35.2cfm fan
Panel size: 3W solar panel
Colors: Galvanized, White
Rib Size on Container: 3.5" & 6.5"

MSRP: $224.99
ON SALE NOW

Solar Mega RoofBlaster for Conex Containers

Fan size: 120mm 96cfm fan
Panel size: 5W solar panel
Colors: Galvanized, White
Rib Size on Container: 3.5" & 6.5"

MSRP: $264.99
ON SALE NOW

Solar Mega RoofBlaster for Conex (Adjustable solar panel)

New Solar Mega RoofBlaster for Conex with 5W Adjustable Solar Panel
Fan size: 120mm 96cfm fan
Panel size: 5W solar panel ADJUSTABLE
Colors: Galvanized, White
Rib size: 3.5" or 6.5"

MSRP: $314.99
ON SALE NOW

2.5" Intake Vents for Shipping Containers

Remember that uniform air movement is the key to good ventilation. You need a balance of intake vents and exhaust vents to make any ventilation system work well. These 2.5" intake vents are the ones we recommend you install on your shipping container near the floor so air movement will come in low and help push the hot air out of the exhaust vents at the top of your shipping container.

Price for a Set of 4: $20

BEST DEAL: For every two Conex Solar Blaster products (RoofBlasters or LightBlasters for Conex containers) purchased, you'll receive a set of 4 intake vents for FREE. Must be purchased together in one order. Add it to your cart BEFORE checking out. Your receipt will only show 1 set of 4, but we'll add the correct amount when packing your shipment.
Stacks Image 5408
Stacks Image 5412

SealBlaster Sealant

NOW AVAILABLE with vent purchase or purchased separately or by the case

Purchase our SealBlaster Sealant so you have the proper caulking to use on your vent installation. The sealant is clear in color so it matches any application. This caulking is completely compatible with our products and their installation procedures. It can be installed in wet conditions and is compatible with all roofing applications. 10.2 fl oz tube.

To get free shipping on the sealant, you must order no more than two tubes per vent or LightBlaster product on the same order — as that is what can fit inside each Solar Blaster vent and LightBlaster box. The sealant does not qualify for free shipping if purchased separately (*see note about ordering larger quantities).

Solar RidgeBlaster

Stacks Image 5252
Get the maximum benefit from ridge ventilation by adding our Solar RidgeBlaster fans for a clean and green solution to proper attic ventilation. Remove hot attic air from the highest point even more effectively with Solar RidgeBlaster!
MSRP: $274.99
ON SALE NOW

Metal RidgeBlaster

Stacks Image 5254
Have a metal roof with ridge venting? Then this is the solar-powered roof ventilation solution for you. Super easy to install before installing the ridge vent cover. Install one every 8-10'.
MSRP: $174.99
ON SALE NOW

16ft Extension Switch Cable

If your application of this product requires a longer cable than the one included, we are now offering a 16' extension cable that can be connected to a switch. This cable includes a 7ft long section that runs from the fan to the solar panel and a second 16ft long section that runs from the panel to a switch. Wire it to a switch of your choosing (not included). This accessory works alongside the Solar RidgeBlaster and Metal RidgeBlaster only.
Stacks Image 4803
MSRP: $29.99
ON SALE NOW

64in Extension Cable

Solar RidgeBlaster® 64-inch Extension Cable allows you to install the solar panel a bit further away from the fan unit. This accessory works alongside the Solar RidgeBlaster and Metal RidgeBlaster only.
Stacks Image 4998
Stacks Image 5001
MSRP: $19.99
ON SALE NOW

SlantBlaster Vent

Stacks Image 5474
Stacks Image 5476
Stacks Image 5479
Stacks Image 5481
Original Solar SlantBlaster
(80mm 35.2cfm fan/3W solar panel)
MSRP: $194.99

ON SALE NOW
New Solar Mega SlantBlaster
(120mm 96cfm fan/5W solar panel)
MSRP: $239.99

ON SALE NOW
Solar Blaster™ newest solar-powered fan is offered in a slant back vent style for asphalt roofs on homes or sheds. The Solar SlantBlaster comes in two versions: the original with a 3W solar panel and 80mm/2900rpm/35.2cfm fan unit, or the new MEGA version which comes with a 5W solar panel and a 120mm/2600rpm/96cfm fan unit. Size: 20.3"x16"x6.5". Now available in two colors: weathered bronze (as seen above) and black.
Stacks Image 5019

Solar TileBlaster

Get the maximum benefit from dormer ("eyebrow") vents — Introducing our new Solar TileBlaster™ roof fans and solar panels for a clean and green solution to boost your attic ventilation.
MSRP: $274.99
ON SALE NOW

Solar S-TileBlaster

We are NOW solar activating O'Hagin "S" style tiled roof vents. Get the maximum benefit from your S tile roof vents — Introducing our new Solar S-TileBlaster™ roof fans and solar panels for an affordable way to boost your attic ventilation.
MSRP: $174.99
ON SALE NOW

VentBlaster - All Metal Exhaust Vent

Exhaust vent for your home, shed, or other shingled roof buildings. Includes:
• 8" diameter vent with 50.265 sq inch of net free vent area
• flashing: 14 gauge spun aluminum, no seam flashing base with pre-drilled holes
• hood: 24 gauge steel
• colors: powdered-coated (not painted) black or brown
• 5 fasteners provided for quick installation (1.75" electrogalvanzied ringed nails with neoprene washer)
" mesh screen — pest-free
• Size: 16.25"x16.25"x8.5"

Colors: Black, Brown, Galvanized

MSRP: $64.99

ON SALE NOW

Solar LightBlaster for Sheds

Stacks Image 5298
Shingle Roofed Shed MSRP: $174.99
ON SALE NOW
Stacks Image 5303
Metal Roofed Shed MSRP: $184.99
ON SALE NOW
This low profile tubular skylight will bring a great source of light into your dark shed. Save electricity and let the sun shine and illuminate your shed during the daylight hours.

Solar LightBlaster for Flat Roofs

This low profile tubular skylight will work on flat roofs of houses, sheds and garages (depending on the thickness of your roof, you may need to order one of our extension tubes if your flat roof decking is more than ½"-¾" in thickness).

It is also an excellent application for RVs and Utility Trailers but YOU NEED TO CALL US SO WE CAN DISCUSS YOUR PARTICULAR APPLICATION. This is a specialty item and we'd like to discuss your application first so you know exactly what you are ordering and how you'll need to modify it in order to install it. Call us at 480-747-7097.
LightBlaster for Flat Roofs
MSRP: $194.99

ON SALE NOW

Solar LightBlaster for Conex Containers

2 solar lightblasters installed on a Conex container
Conex LightBlaster MSRP: $204.99
ON SALE NOW
This low profile tubular skylight will bring a great source of light into your dark shed. Save electricity and let the sun shine and illuminate your shed during the daylight hours.

Extension Tubes for Solar LightBlaster

If your application of this product requires a longer tube, we are now offering a 12" & 24" extension tube. These tube kits includes 6 self-tapping screws and 4' of silver tube tape. These tube extensions are to extend the Solar LightBlaster product line for shed and container applications in cases where you might have a dropped ceiling, for example. NOTE: There is a blue film inside the tube to protect the reflective surface. It is easily removed before your install.
24 inch Solar LightBlaster Extension tube
12" Ext. Tube MSRP: $29.99
ON SALE NOW
24" Ext. Tube MSRP: $49.99
ON SALE NOW
12 inch Solar LightBlaster Extension tube